Imikhiqizo

  • Ithuluzi Langaphakathi Nangaphandle Thumela I-grinder ku-Lathe

    Ithuluzi Langaphakathi Nangaphandle Thumela I-grinder ku-Lathe

    I-lathe Tool post grinder iyithuluzi lomshini elisetshenziselwa ukulola amaphethelo okusika amathuluzi afakwe esigxotsheni samathuluzi entweni.Ingasetshenziselwa ukugaya ama-bevel wamathuluzi aphendukayo kanye nokulola amathiphu amathuluzi ayisicefe.

     

    uphenyoimininingwane
  • I-HSS Annular Cutter With Weldon Shank

    I-HSS Annular Cutter With Weldon Shank

    I-HSS annular cutter ilungele ukusika izinto eziqinile.

    I-cutting edge engasika kalula ngensimbi, ipulasitiki, nezinye izinto eziqinile.

    I-annular cutter nayo ihlala isikhathi eside kakhulu, okwenza kube ukukhetha okuhle ekusebenziseni umsebenzi osindayo.

    uphenyoimininingwane
  • LINGISA Okuphakelayo Kwamandla kwe-Taiwan AL-500P

    LINGISA Okuphakelayo Kwamandla kwe-Taiwan AL-500P

    Imodeli:AL-500P

    I-RPM:0-160

    Ubukhulu be-PPM: 160

    I-Beval Drive Gear Rate:21.4:4.8:1

    I-Torque enkulu:780 in-lb(900Kgf/cm)

    Isilinganiso samandla kagesi: 110V 50/60HZ

    Ikalwe okwamanje: 1Amp

    uphenyoimininingwane
  • I-ALSGS AL-510S sereis power feed

    I-ALSGS AL-510S sereis power feed

    I-AL-510S ifakwe ku-X-AXIS ,Y-AXIS,Z-AXIS yemishini yokugaya kuyilapho i-AL-510SX ifakwe ku-X-AXIS,AL-510SY ifakwe ku-Y-AXIS,AL-510SZ ifakwe ku-Z. -I-AXIS.

    I-Voltage – 110V ngokuzenzakalelayo , 220V-240V ngokuzikhethela.

    Intambo Yamandla - intambo yase-US;UK, EU, ozikhethela.Sithumela intambo efanele ngokuya ngomkhumbi wakho uya ezweni.

    I-Max Torque - 650in-ib

    Isisindo - 7.20 KGS

    uphenyoimininingwane
  • Umshini Wokubhola Owuzibuthe ku-35mm 50mm noma 120mm Umthamo

    Umshini Wokubhola Owuzibuthe ku-35mm 50mm noma 120mm Umthamo

    Umshini wokumba uzibuthe ulungele ukubhoboza ngensimbi.Ozibuthe abanamandla bakha indawo eqinile ngenkathi i-drill bit izungeza, okwenza kube lula ukubhoboza ngisho nensimbi ewugqinsi.Umshini kulula ukuwusebenzisa futhi uza nezinhlobonhlobo zama-drill bits ongakhetha kuzo.Uma ufuna indlela elula nesebenzayo yokubhoboza insimbi, ungabheki ukudlula umshini wokumba uzibuthe.

    uphenyoimininingwane
  • I-Slotting Head okunamathiselwe kumshini wokugaya

    I-Slotting Head okunamathiselwe kumshini wokugaya

    Ikhanda lokunamathisela okunamathiselwe komshini wokugaya lilungele ukudala izikhala ngezinto ezahlukahlukene.

    Ngokwakhiwa kwayo okunembayo kanye nomklamo osebenziseka kalula, leli khanda elishayayo liyisengezo esihle kunoma yimuphi umshini wokugaya.

    uphenyoimininingwane
  • I-QKG Type High Precision Tool Vise

    I-QKG Type High Precision Tool Vise

    I-QKG Tool Maker Vise iyi-vise enembayo eyenziwe ngensimbi yekhwalithi ephezulu eshiswe ukuze ibe lukhuni ebusweni be-HRC58～62.

    uphenyoimininingwane
  • I-QGG-C yohlobo lwe-precison tool vise ene-groove

    I-QGG-C yohlobo lwe-precison tool vise ene-groove

    1. Ama-Precision Vises enziwe ngensimbi yekhwalithi ephezulu efakwe ngobulukhuni ebusweni: HRC58～62
    2. Ukufana 0.005mm/100mm, squareness 0.005mm
    3. Ngokushesha ukubamba futhi kulula ukusebenza
    4. Isetshenziselwa ukulinganisa okunembayo, ukuhlola, ukugaya okunembayo, i-EDM, nomshini wokusika izintambo
    5. Qinisekisa ukunemba okuphezulu kunoma yisiphi isikhundla

    uphenyoimininingwane
  • Uhlobo lwe-QGG lwethuluzi lokunemba okuphezulu

    Uhlobo lwe-QGG lwethuluzi lokunemba okuphezulu

    1.Ama-Precision Vises enziwe ngensimbi yekhwalithi ephezulu efakwe ngobulukhuni be-wsurface: HRC58～62
    2. Ukufana 0.005mm/100mm, squareness 0.005mm
    3. Ngokushesha ukubamba futhi kulula ukusebenza
    4. Isetshenziselwa ukulinganisa okunembayo nokuhlola, ukugaya okunembayo, i-EDM nomshini wokusika izintambo
    5. Qinisekisa ukunemba okuphezulu kunoma yisiphi isikhundla

    uphenyoimininingwane
  • Umshini Wokudonsa Amandla Womshini Wokugaya

    Umshini Wokudonsa Amandla Womshini Wokugaya

    Ikuvumela ukuthi ushintshe amathuluzi asuka kumshini wokuphotha womshini wokugaya ngokushesha (cishe imizuzwana emi-3)
    Ngomshini wokugaya we-Bridgeport
    Kulula ukufaka.Phinda usebenzise ibha yokudonsa ekhona.
    Isebenza emoyeni wesitolo kuphela.Awudingi ugesi.
    Kufaka iyunithi ye-pneumatic switch kanye nesihlungi somoya esivamile se-lubricator (FRL).

    uphenyoimininingwane
  • Round Uhlobo Fine Pole Permanent Magnetic Chuck

    Round Uhlobo Fine Pole Permanent Magnetic Chuck

    1. Ingafakwa emshinini wokugaya ojikelezayo

    2. Ukunemba okuphezulu namandla kazibuthe anamandla, uzibuthe osalayo ophansi

    3. Uhlobo lwe-Micropitch olufanele ucezu lokusebenza oluncane noluncane

    4. Uhlobo lwephimbo oluhle lungcono kakhulu kucezu lokusebenza olukhudlwana nolushubile

    5. Imikhiqizo ingenza ngendlela oyifisayo ngokwezidingo zekhasimende

    uphenyoimininingwane
  • I-Fine Pole Magnetic Chuck ye-Surface Srinder

    I-Fine Pole Magnetic Chuck ye-Surface Srinder

    Ukusetshenziswa okuyinhloko kweMagnetic Chuck nezici

    1. Ukulinganisa kahle ebusweni obuyisithupha.Isebenza kumshini wokugaya ongaphezulu, umshini we-EDM kanye nomshini wokusika oqondile.

    2. Isikhala se-Pole silungile, amandla kaMagnetic asakazwa ngokufanayo.Isebenza kahle emshinini omncane futhi omncane wokusebenza.Ukunemba kwethebula lokusebenza akuguquki ngesikhathi sokusebenza uzibuthe noma sokususa uzibuthe.

    3. Iphaneli ngokucubungula okukhethekile, ngaphandle kokuvuza, ivimbela ukugqwala ngokusika uketshezi, inweba impilo yokusebenza futhi ivumele ukusebenza isikhathi eside ekusikeni uketshezi.

    uphenyoimininingwane
123456Okulandelayo >>> Ikhasi 1/9